Media center Press releases for products

Baltic Safety Products are now manufacturing an adjustable Jackstay made from strong 25mm polyester webbing. With a maximum length of 12m and Stainless Steel buckles and shackles the Jackstay is tested to take a load of more than 2000kg. The Jackstay has a sewn loop at one end and an adjuster at the other end. Both ends should be attached to strong points that together will take in excess of 2 tonnes. Adjustment of the jackstay length is made by moving the webbing through the stainless steel ladder. It is important to keep the jackstay stored away from direct sunlight in a well ventilated space when not in use to prevent Ultra Violet degradation. It is also important to check that the strong points must not have any corners or sharp edges that may abrade or cut the webbing. Established for over 30 years with their headquarters in Älgarås, Sweden, Baltic Lifejackets have now become the largest manufacturers of lifejackets and buoyancy aids in Europe. They have worldwide representation through its distributor network and a full presentation of all Baltic products can be seen at www.baltic.se

The Baltic Rescue is the ultimate in rescue performance jackets. The jacket combines the advantages of a foam buoyancy aid with an inflatable lifejacket. The combination of the two means that 77N of buoyancy comes from the supersoft buoyancy material and 185N from an inflatable twin chamber lung, together giving a total buoyancy of 262N. The inflatable twin chambers are available as manual/ automatic or automatic/ automatic. All automatic chambers have manual backup. The Rescue is tested and approved to the M.E.D. / SOLAS, EN396, EN12402, EN1095/EN ISO 12401, standards and has many essential features making it an ideal choice for high speed rescue boats and life boats. The Baltic Rescue jacket is packed with many features to ensure the ultimate safety for the wearer as well as ensuring it is as practical as possible to cope with a number of situations: An oval shaped inflation/ rapid deflation hose is fitted. It is flexible and low profile to prevent the jacket from becoming too cumbersome. Should the wearer need to quickly deflate the lifejacket section the jacket is fitted with a quick release dump deflation valve. The specialist mouth piece enables rapid re-inflation. The status of the automatic inflator can be checked easily and quickly with a status indicator window on the right hand side of the jacket. The jacket is fitted with an adjustable holder for a VHF or communications radio, as well as an adjustable holder which can be used for an Epirb. A clear window on the left side allows space for an ID card and a clip which can be used for an emergency light holder. There is also an attachment for a rescue knife on the belt and a D-ring for attaching emergency switch lanyards to. The rear of the jacket has 3 large detachable Velcro strips covered in reflective material. For emergency services these can be replaced with ID strips where appropriate. The collar of the jacket contains a spray hood which fits over most standard crash helmets and is fitted with Baltic’s unique face clearance hoop. The adjustable safety harness is approved to EN1095 and has a non magnetic stainless steel buckle. Adjustable thigh straps keep the jacket in place and stop it from riding up when worn. There is a lifting loop that is attached to the safety harness. This is accessible at the back of the neck for easy access. The Baltic Rescue comes in 1 size to fit all from 40 – 150kg and has a 2 year guarantee.

The Baltic Spray is an excellent standard buoyancy aid that has become a classic since it first introduction to the Baltic range in 2006. The jacket has now been refreshed with new colour styling. The Buoyancy Aid is fastened at the front with a Delrin locking zip and quick lock adjustable waistband. A draw string hem prevents the buoyancy aid from riding up and elasticated side panels allow ease of movement. There is a D-ring to fit an emergency switch lanyard to. The Baltic Spray is available in 4 colours, navy/ red, black/grey, navy/ white and orange/white. Sizes are available from Small for 30-50kg up to XL for 90+kg. Baltic Lifejackets manufacture a wide range of lifejackets and buoyancy aids for all aspects of leisure as well as for commercial use. Established for over 30 years with their headquarters in Älgarås, Sweden, Baltic Lifejackets have now become the largest manufacturers of lifejackets and buoyancy aids in Europe. They have worldwide representation through its distributor network and a full presentation of all Baltic products can be seen at www.baltic.se

Baltic Lifejackets have launched a brand new model in their popular range of gilet style buoyancy aids. The jackets are styled so can be worn just as easily on land or sea. The jacket is made of panelled supersoft floatation material with a high quality outer fabric. Retro reflective patches fitted to the back of the collar provide visibility on the jacket and other features include a stow away crutch strap and a D-ring to attach an emergency switch lanyard to. For additional comfort and to prevent chaffing the collar is quick drying Polartec fleece lined and for extra warmth the zips are all wind and shower proof. A neat inside pocket provides the idea place for a mobile phone or GPS. The Baltic Surf & Turf Cup is available in 3 colours, orange, black or white and also either in male or female cuts of the jacket. The male version is available from XS 50-60kg to XXL 100+kg and the female version from S 50-60kg – XL 80-90kg.

Baltic Lifejackets announced the appointment of a new distributor for Lithuania. The company is called UAB ‘Svajoniu jachtos” Ltd which translates to ‘Dream Yachts’. Svajoniu jachtos is based in Vilnius, Lithuania and the company has worked in the marine sector since 1992 and is looking forward to expanding its current offering with the addition of Baltic Lifejackets and buoyancy aids. Baltic lifejacket founder Per Frode stated “we are pleased to be pushing forward into new market areas, and with our new warehouse facility in Sweden we are better able to support our distributor network”. Headquartered in Älgarås, Sweden for over 30 years Baltic Lifejackets is the largest manufacturers of lifejackets in Europe. They have worldwide representation through its distributor network and a full presentation of all Baltic products can be seen at www.baltic.se

Baltic Lifejackets have announced the appointment of a new distributor for Malta. D’Agata Marine Ltd is based in Gzira in Malta and specialise in all areas of sea safety and equipment used onboard commercial ships and pleasure yachts. The company has been established for 20 year and service life rafts, as well as supply fire extinguishers and other key safety equipment. Malta comprises of 3 islands and has 140 km of coastline. Due to its geographical position it is a very popular destination and stop off point for ships of all types cruising or travelling throughout the Mediterranean. Alexander D’Agata stated “We are very proud to represent Baltic in Malta, as the products are of supreme quality and increase the offering of D’Agata Marine”. Baltic Lifejackets has been established for over 30 years with their headquarters in Älgarås, Sweden, and are now the largest manufacturers of lifejackets and buoyancy aids in Europe. They have worldwide representation through its distributor network and a full presentation of all Baltic products can be seen at www.baltic.se

Baltic Lifejackets have been manufactured in Europe since the 1970’s and the company has been working towards a greener manufacturing policy. Now all of the foam used in the many varieties of lifejackets and buoyancy aids that Baltic manufactures do not contain any CFC’s. The material used by Baltic is high quality recyclable closed cell foam. To run its facility all the electricity used is from specialist suppliers that generate power only from renewable sources such as water or wind. Baltic’s environmental policy covers all aspects of their business. In the design & development stage they focus on the effective use of raw materials to minimise waste. Logistics is also optimised to reduce the transportation requirements. A full copy of their environmental policy including details of all their recycling and waste management policies can be seen at www.baltic.se. Founder Per Frode commented “We are proud as a company to be adopting some green policies into our manufacturing processes” Established for over 30 years with their headquarters in Älgarås, Sweden, Baltic Lifejackets have now become the largest manufacturers of lifejackets and buoyancy aids in Europe. They have worldwide representation through its distributor network and a full presentation of all Baltic products can be seen at www.baltic.se

Following the success of the Baltic Argus launched last year Baltic have now launched the Baltic Ultimate. The lifejacket is designed along the style of the original Baltic Bluewater. The Baltic Ultimate comes with a neat inspection window revealing a status indicator. The two indicator bars show if either the automatic head or the CO2 cylinders have been used and therefore if the jacket needs rearming. The Ultimate has a detachable washable soft fleece collar for greater comfort which also helps when wearing foul weather clothing. The bladder is integrated within a protective outer cover with Velcro closures, which makes easier folding after deployment. There is a wide, comfortable detachable crutch strap which can be stored inside the lifejacket and the waistband has an easily adjustable quick release buckle. A version of the Baltic Ultimate is also available with an integrated safety harness approved to EN1095. This jacket has a non-magnetic stainless steel buckle and a sturdy D ring for attaching a safety line. Both versions are available in black and to fit weights from 40 – 150kg it also comes with a 5 year guarantee.

Baltic Lifejackets have released a newly developed elasticated safety line. The line is the first of its type available in the market to include an overload indicator. Designed to show when the safety line needs to be replaced the overload indicator will help users keep their equipment in good working order. The new elasticated safety line has two double action locking safety hooks in nonmagnetic stainless steel, and is tested and approved for national and international yacht racing and to European standard EN1095. Fully extended the 2 hook elasticated safety line is 2 metres long.

Due to the popularity of many of the Baltic range of lifejackets and buoyancy aids several of the ranges have expanded with new colour style options. The Baltic Spray is a general purpose Buoyancy aid which has proved popular for many years. Three new colours have been added to the range to bring it up to date and provide more stylish choices. The Baltic Spray has a Delrin locking zip, quick lock adjustable waist band, draw string hem and elasticated side panels. The 50 Newton jacket comes with a 5 year guarantee. The Baltic Surf & Turf was launched 2 years ago and has proved a popular jacket that displays fashionable properties as well as having the same safety properties as traditional buoyancy aids. The Surf & Turf range are gilet style jackets made of panelled supersoft floatation material in a high quality outer fabric. Rated to 50 Newtons both the Surf & Turf cup which is single colour or the Surf and Turf Trend which is dual colour are available in male and female cuts. The Cup range is an entirely new range of single colour jackets giving more consumer choice and the Trend has added more choice to the available colour combinations. Other additions to the range from Baltic this year include a 2 hook elasticated safety line and a bluewater lifejacket with an inspection window called the Baltic Ultimate.

Baltic Lifejackets have appointed a new distributor to cover the regions of Slovenia, Croatia, Serbia and Montenegro. BURIN YC d.o.o has been established for a long time in the Marine industry and they are official distributors for Elan Sailing Yachts, Feeling Sailing yachts and Privilege Catamarans. They also distribute several nautical products. The region covered incorporates over 6,000km of coastline and there is a lot of sailing activity in the region, including many charter companies. BURIN will be exhibiting this year all the regional shows including Belgrade Boat Show, Ljubljana Boat Show, Zagreb Boat Show and the Split Boat Show. Baltic lifejacket founder Per Frode stated “we are pleased to be pushing forward into new market areas, and with our new warehouse facility in Sweden we are better able to support our distributor network”. Headquartered in Älgarås, Sweden for over 30 years Baltic Lifejackets is the largest manufacturers of lifejackets in Europe. They have worldwide representation through its distributor network and a full presentation of all Baltic products can be seen at www.baltic.se

Baltic Lifejackets based in Älgarås, Sweden has completed the first part of its expansion programme with the addition of two new warehouses. The first warehouse is 450m2 and the second new warehouse is 1300m2, so the total area for the Baltic premises now exceeds 5750m2. The expansion in warehousing space will enable Baltic to increase the stock holding and maintain its reputation of order fulfilment. By focusing on design and quality combined with product availability this has enabled Baltic to become the largest European manufacturer of lifejackets and buoyancy aids. The team in Älgarås have also recently increased to cope with demand of the ever expanding product range. The new warehouse is a reflection on the fact that many people are taking safety seriously and Baltic’s high quality products meet that demand. Each product is vigorously tested and quality checked before being sent to customers throughout the world. Per Frode, Baltic founder and Chairman announced that “the new facilities will help to maintain our excellence in distribution and service”. The next stage of the expansion of the site is to increase the office capacity to further customer care, which will happen over the next six months.

Baltic Lifejackets have launched a hybrid jacket for use in extreme conditions that is both a tested and approved buoyancy aid (EN393) and tested and approved lifejacket (EN396); particularly suited to the rescue boat and RIB market. The Baltic RIB has several unique features. A buoyancy aid providing 75N of buoyancy, which in an emergency should more buoyancy be required can be inflated to a full lifejacket giving a total of 240N of buoyancy. The RIB also features a tested and approved safety harness (EN1095). The robust jacket has a spray hood integrated into the collar that is large enough to fit over a safety helmet. Other features are a VHF / EPIRB holder, inspection window for control of the inflation mechanism, lifejacket light attachment point, knife holder and clear ID card holder. To keep the jacket in place the Baltic RIB has a zip front and 50mm waist belt with stainless steel buckles. Two wide crutch straps are connected at the back to a beaver tail flap for extra comfort. The Baltic RIB is available in one size and fits persons from 40 – 150kg. The jackets comes with a 2 year guarantee.

Baltic Lifejackets Sweden proudly celebrates its 30th Anniversary this year. To mark the occasion Baltic is launching a limited edition retro buoyancy aid, the Rekord. The Rekord Buoyancy aids are rated to 50N and are available in Red, Orange or Navy and are supplied with matching seaman style duffel bags. To complete the styling the product even has retro inspired swing tickets and decals. The jacket is available in sizes XS for 40kg – XXL for 100+kg. The Rekord is ideal for those who enjoy classic sailing and motorboating. Baltic Lifejacket founder Per Frode commented “Baltic was established 30 years ago with one aim, to provide the ultimate in lifejacket and buoyancy aids for a variety of uses. In the 30 years we have not deviated from that goal and have developed a range of products which provide lifejackets and buoyancy aids for sailing, motorboating, fishing, personal watercraft use and most water based activities, including commercial activities”. Baltic Lifejackets has an extensive on-going research and development programme, working with the latest materials and this year has launched a number of products including the innovative Hamble buoyancy aid. Headquartered in Algarås, Sweden Baltic Lifejackets is the largest manufacturers of lifejackets in Europe. They have worldwide representation through its distributor network and a full presentation of all Baltic products can be seen at www.balticlifejackets.com

Following the successful Hamble gillet launched last year, Baltic has developed a sleeved version of the jacket. As with the Hamble Gillet the 50N buoyancy aid is integral to the Marstrand jacket. The Marstrand provides a midway point between a full foul weather and costal jacket and is yet another innovative product from Baltic. With strong waterproof outer fabric the high collar is fleece lined for comfort and to prevent chaffing. For extra warmth the zips are all wind and shower proofed. The Baltic Marstrand can be supplied either as an automatic gas or mouth inflation buoyancy aid. Both versions have a top up tube accessible on the top left chest via a water protective zip. The Baltic Marstrand styling is also designed for either male or female cuts of jacket and is offered in 3 colours, black, white and red. The male version is available from XS 50-60kg to XXL 100kg+ and the female version from S/M 40-60kg to L/XL 70-80kg.

The new Baltic Argus takes the guess work out of checking if a lifejacket is charged and ready to go. Styled on the same successful design as the Baltic Winner the Argus comes with a neat inspection window revealing a status indicator. The two indicator bars show if either the automatic head or the CO2 cylinders have been used and therefore if anything needs replacing. The top line is for the automatic cylinder and the second line for the CO2. A red line shows there is a problem with the jacket and needs replacing and two green bars indicates that it is safe to use. The jacket uses zip burst technology which makes the jacket more robust and has greater longevity than traditional Velcro closures. Two quick openings in the cover zip closures allow access to the manual inflation tube and the gas inflation mechanism. Additional features on the Argus include a universal attachment point on the front of the jacket for items such as an EPERB or VHF. The crutch strap is totally removable and is stowed neatly inside the cover. It is fitted with a quick release buckle on the front. The Baltic Argus is available in black or red and fits a number of sizes from 40kg to 150kg and comes with a 5 year guarantee. CO2 and automatic cylinders should be visually checked every time you use the jacket. New cylinders are available from Baltic stockists or the jackets can be sent to a Baltic Service Centre for a full service check.

The popular Baltic Winner 150 Lifejacket has had an upgrade to include a zip to replace the Velcro fastening. The zip is a special ‘burst zip’ so the automatic deployment of the lifejacket is unaffected. Stronger than Velcro the zip also makes repacking of the jacket quicker and easier. The Winner 150 Zip lifejacket has always been a popular design with its low profile styling and unique soft fleece collar for comfort. It inflates either automatically or by manual gas inflation. Two other special features are the ‘quick release’ openings, one to access the mouth inflation tube and the other the gas inflation mechanism. Additional safety features are a lifting becket, whistle and six retro reflective patches for clear visibility. All Baltic lifejackets are a high visibility colour when inflated whether the red or black cover colour is chosen. The Winner 150 Zip has toggles so that the jacket can be fitted to a sailing jacket or a sprayhood – which is also available from Baltic - can be added retrospectively. The Baltic Winner 150 Zip also comes with an option of an integrated safety harness to meet safety regulations EN1095. The safety harness is easily adjustable and has a non magnetic stainless steel buckle and sturdy D-ring attachment point. Both the standard and harness versions of the Winner 150 Zip come with a 5 year guarantee.

As the summer approaches, for those getting out on jet-ski’s or other personal watercraft Baltic have launched the Shockwave buoyancy aid. Simple to wear and comfortable the Shockwave does not get in the way or inhibit the user. The Shockwave is made from a rugged high tenacity fabric and has neoprene inserts in both the shoulders and waist for complete flexibility. As with all Baltic products there is a locking zip and a D-ring to attach the emergency switch lanyard. Two webbing straps secure the jacket firmly to stop it riding up and keep it firmly on the person what ever the condition. The Shockwave also has two passenger handles for pillion passengers. Available in six sizes from XS-XL (30kg – 90+kg) the Shockwave comes in blue or red

Baltic have launched the new Gillet style buoyancy aid – The Hamble. The Hamble combines style and comfort with safety whilst on and around the water. There are two versions available; one is the automatic, so the lung automatically inflates on immersion in water. The automatic version also has manual overide. The second version is an oral inflation option, which is operated via an inflation tube accessible on the top left chest via the water protective zip. The inside of the jacket has a breathable mesh lining to ensure the Hamble remains lightweight. The buoyancy aid has a unique 55 Newton integrated inflatable lung. The outer material is water resistant and is lined with an ultra thin floatation material. As well as ultra stylish design and top safety considerations the Hamble incorporates many practical design features. There is an inside GPS/Mobile phone pocket and 2 outside zipped pockets. There is also a stowaway crutch strap fitted and the hem is elasticated to provide a snug fit that doesn’t ride up. There is also a version tailored to fit the female form. The Hamble is available in sizes XS – XXL for weights 50kg – 100+kg and there are three colour options, black, red and white.

For a winters day fishing it is essential to keep warm and safe. Baltic Safety Products now present the Baltic Polar Flotation suit. The Floatation suit has three vital lifesaving features. Firstly it has the same properties as a standard buoyancy aid. Secondly the suit is 100% waterproof and finally it protects the wearer against cold shock. The suits are CE marked and tested and approved according to EN393 and ISO 15027-1. The test criteria states that when immersed in 15ºC water for two hours, test subjects must not loose more than 2ºC core temperature, however the Baltic test subjects only lost 0.8ºC core temperature. Practical for fishermen the Polar has four fleece lined thermo pockets, plus two cargo pockets and one inside pocket. Additional safety features include retro reflective patches and a D-ring for emergency switch lanyard and a whistle. For comfort the suit has internal braces and quick drying mesh lining should water get inside. Water locks are also fitted to the legs to prevent the exchange of cold water and fully adjustable polyurethane cuffs are fitted to the sleeves. The suits are available in sizes XS – XXXL 50kg – 100+kg and the blue/grey polar is also available in junior size.

Baltic have re-styled and improved their ever popular Dinghy Pro range. This advanced buoyancy aid is used by Olympians and world champions and is one of the most popular buoyancy aids on the market today. Extremely comfortable to wear the Dinghy Pro incorporates Airex super soft foam in combination with laminated polyester foam. The needs of every dinghy sailor are taken into account with Baltic’s renowned tried and tested design details. The front of the jacket has a Mylar front pocket, and a durable all Delrin zip and quick release buckle. The restyle means the jacket is easier to put on as the waist band has a double Velcro closure also preventing the buoyancy from riding up during use. With reinforced shoulders and a bottom draw tie, the jacket can easily withstand the rigors of fast dinghy racing and high activity watersports. The style of jacket is high cut which means that it does not get in the way for hiking out and trapezing. The Dinghy Pro is the choice for the Swedish National Dinghy team for the World, European and Nordic championships. The jacket is available from XS to XL which is from 30kg to 90+ kg. The Dinghy Pro is available in 5 different colour combinations

Specifically 100% designed and cut to fit ladies Baltic present their new Twin Buoyancy aid. Light weight and comfortable the Twin Jacket is manufactured from a new soft handle fabric. The floatation material is divided into several sections with the top section containing supersoft foam. Jersey laminated neoprene inserts underneath arms and on the shoulders ensures a perfect fit. The Baltic Twin is fitted with a sturdy locking zip, adjustable elasticated hem with D-ring attachment for emergency switch lanyard. The Baltic Twin Female is available in red, white and light blue with black lining and details. Easily maintained the jacket is simply cleaned with a mild non-biological cleaning solution. Sold with a 5 year guarantee the jacket is available in sizes from Medium to Xtra Large 50kg – 90+kg. Baltic also supply a Baltic Twin designed and cut for the male form.

Baltic has launched a totally new concept in water sport buoyancy aids, the Neo. Suited to wear on Jet Ski’s, RIB and PWC’s these highly stylish buoyancy aids are designed for optimum fit and comfort. The Neo’s construction is based on an inner layer giving strength and an outer jersey laminated neoprene fabric giving a close fit and easy dynamic use. Fitted with two grab handles on the front of the jacket it makes it easier for pillion passengers on Jet Ski’s to hold on. What ever twists and turns the user makes whilst wearing the Neo it will not become loose or hinder movement. The Neo fits like a glove and has two waistbands, a chest strap, self locking zip and a D-ring to attach emergency switch lanyards. The strength of the inner layer means the jacket is rated to EN393 or 50 Newtons and is tested and approved to CE standard. The Neo is available in 3 colour options, grey/black, blue/black, red/black and 3 sizes Small through to Xtra Large from 50kg – 90+kg.

A spate of tragedies in the rowing fraternity across Europe has prompted the development of a new and innovative buoyancy aid. As leaders in providing the correct equipment for safety on the water, Baltic were keen to address the problem for rowers where there is either reluctance or it is impractical to wear life jackets. The solution was the Baltic Henley – an ultra lightweight, compact and comfortable CE Approved, 50N rated buoyancy aid. The jacket is made from double layer Lycra® with an inflatable bladder inside that operates either automatically or manually with a quick pull on an inflation head situated on the left shoulder. The stretch Lycra body shell, is slim fitting with a flat front that won’t impede the athlete. The collar is lined with quick drying soft Polartec® fleece to prevent chafing and is fitted with a locking zip vent the jacket or close to form a warm collar. A ‘duck-tail’ ensures that the wearers back remains covered when the athlete is bent forward in the boat and the bottom belt ensures the jacket will not ride up. The design copyrighted Henley Buoyancy Aid passes the requirements set for use by the British Amateur Rowing Association and is currently under evaluation by members of the International Canoe Union. The Henley is simple to use and comfortable. It is available in sizes from Extra Small to Extra Large for persons 50 to 90 plus Kg.

With the warmer weather, thoughts are turning to getting out on the water and new for this season Baltic Safety Products have just launched their latest generation GT Buoyancy aid. Ideal for RIB and small power boat use, the jacket’s key features are designed for safety and comfort. On a RIB or small powerboat it is essential that buoyancy aids do not impede the operators’ movements. The GT Buoyancy aid has a neoprene waist band to prevent it riding up and the neoprene shoulder inserts provide flexibility of movement. The GT Buoyancy aid is rated 50 Newton (EN393) and is available in 6 sizes from Junior to XL and 4 stylish colours, Navy Blue, Red, White and Pale Blue. There are several unique features to the buoyancy aid that make it stand out from the competition, and it is ideal for use for all ages, who are able to swim. Salt water will not corrode the heavy duty zipper which also features a unique locking zip so it won’t accidentally unzip in the water. The GT has a D Ring to attach the emergency switch lanyard to and the quick and adjustable waistband ensures it fits all body shapes. “The new Baltic GT buoyancy aid is a sophisticated buoyancy jacket ideal for RIB and small power boat use” said Keith Hughes, Baltic UK’s Managing Director.